Badge

No.1 Lockout Tagout Specialist

Class 00 RED Latex Electrical Insulating Gloves (500V)

SKU
ELE10/
£33.98(exc. VAT)

Manufactured to EN60 903:2003 and CEI 60 903: 2002

PPE Category III = Irreversible risks 

Class Table

Overglove Table

Due to the gloves' natural latex base, our electrical insulating gloves offer high dielectric characteristics.

The Insulation of hands is determined by the class number and nominal supply voltage. These gloves are Class 00, PPE category III for protection against irreversible risks. 

They are available in four sizes from 8-11.

For complete mechanical protection, these gloves should be used with leather overgloves to prevent cuts in the latex. Go one size up with the overgloves.

  • Electrical Safety Gloves 360mmL x 0.5mm thick Class 00 500V
  • Fully insulating gloves each test stamped
  • Manufactured to EN60903
  • A pneumatic glove tester is available to carry out inflation test as recommended by the EN60903 and IEC903 standards (for class 00 & class 0)
  • Electrical re-testing service available for Class 1 and above gloves
  • Mechanical resistance obtained with leather overgloves
  • High dielectric characteristics
  • Ergonomic shape
  • Lightly powdered
  • Easy to slip on and off
  • Natural latex base
  • Length 360 mm
  • Category AC
  • Various sizes available
  • Cut Edges
More Information
TypeGloves

Size Guide

How long do the Latex insulating gloves Last?

As the purpose of these gloves is to provide a high level of protection against potentially high voltages, it is important to check the integrity of the gloves as much as possible. The following is recommended:

  • Class 00 and Class 0: These gloves are suitable for use as long as they have not been physically damaged. If they have been damaged (for example cuts and nicks) we would recommend immediate replacement. A simple air test (using a pneumatic glove tester or simply blowing in air and twisting the sleeve to check for leaks)
  • Class 1 and Higher: These gloves must be visually inspected and tested, with a dielectric test, for suitability every 6 months from the date of manufacture onwards. The manufacturing date can be found on the product packaging.
Write Your Own Review
You're reviewing:Class 00 RED Latex Electrical Insulating Gloves (500V)
Your Rating

Datasheet on Electrical Safety Gloves - test info Click here to download our datasheet